Our Flip: Raise The Flag

While I’m totally smitten with the tropical backyard at the flip, I’ve also fallen in love with this awesome flagstone patio that we added right off the back door.

Our Flip: Raise the Flag

Let me start from the very beginning (which, according to Julie Andrews, is a very good place to start).

A few weeks ago when we first bought the flip, the patio was frightening:

Before - Back Patio

I don’t know which was scarier – the blue outdoor carpeting, the green plastic roofing, the dark and dingy screens, or the confining peach brick wall?  Take your pick.  Clearly, it all had to go.

Once demo was complete, we were left with this worn concrete pad with remnants of the adhesive from the blue outdoor carpet – not too pretty to look at.

Our Flip: Raise the Flag

We considered our options.  If we stained it, we’d have to grind down the concrete to get rid of the adhesive, and that still wouldn’t fix the few cracks in the slab.  Same thing for painting.  Stamping the concrete would be too expensive, and wasn’t really the look we were going for.  That left tiling the concrete pad – but how expensive would that be?

Our first bid that we got from our tile guy was high – like sky-high.  We were in a panic, what were we going to do to make the patio live up to the rest of the backyard?  My hubby instantly went into bargain-hunter mode – it’s one of his strong suits.  After a day of phone calls, he got a bid for less than a 1/4 of our tile guy’s original bid – score!!!!

But before the tiling extravaganza could begin, we needed some tile!  We headed off to this place, which is the same stone yard where we bought the Austin stone for our fab fireplace:

Our Flip: Raise the Flag

Look at all of the goodies!!!  We cute right to the chase and headed over towards the Oklahoma flagstone – we wanted to use the same stone for the patio as we did for the coping on the pool so that the pool and patio would look totally cohesive.

Do you think we found enough stone??

Our Flip: Raise the Flag

We stuck our name on this ton of 1 inch thick flagstone.   1 inch flag is perfect for tiling over an existing concrete pad – any thicker and it’s difficult to work with.  However, you wouldn’t want to lay these thin babies straight on the ground without the support of concrete as flagstone is brittle and could break.

Our Flip: Raise the Flag

The next day, my lovely hubby borrowed a truck and brought this ton of precious cargo back to the flip:

Our Flip: Raise the Flag

Soon after, our new tile guy was picking the perfect stones and laying them out for a dry fit:

Our Flip: Raise the Flag

A few hours and buckets of thinset later, our patio looked like this!!

Our Flip: Raise the Flag

We ran off to Home Depot to buy 8 bags of Polyblend sanded grout in Fawn – the perfect match for the pool coping.  Here’s the patio all grouted and gorgeous:

Our Flip: Raise the Flag

A few days later, we wetted down the patio and got to scrubbing with a long-handled broom – this was to remove the fine layer of grout that dried on top of the flagstone.

Our Flip: Raise the Flag

And now the patio looks like this!!  I’m in love.

Our Flip: Raise the Flag

So, what’s the verdict?  Do you guys like it?  What kind of outdoor space do you have at your crib?

Our Flip: Make A Splash

Hold onto your socks, it’s time for the big backsplash reveal!!

I’ve been excited about this reveal for weeks, ever since we picked out this gorgeous backsplash:

Our Flip: Granite and Marble and Travertine, Oh My!

Mmm, delicious – I love the blend of marble with frosted and translucent glass.  This unique backsplash has a ton of personality and style, while still remaining neutral enough to appeal to any potential buyer.

Check out the tile mid-install – you can already tell it’s going to be fab:

Our Flip: Make a Splash

This tile is designed to fit together perfectly, with staggered rows that interlock and each sheet of tile connected on a mesh backing – see?

Our Flip: Make a Splash

And now, the moment you’ve all been waiting for . . . drumroll please . . .

Check out that backsplash!!!!

Our Flip: Make a Splash

I love the way the undercabinet lighting draws your attention straight to the backsplash.  And now that the backsplash is all installed and gorgeous, I can’t wait for the brushed nickel hardware and stainless steel appliances to be installed – that will really complete the look.

Here’s another shot:

Our Flip: Make a Splash

The granite is still dusty, the faucet hasn’t been installed and the electrical outlets still need to be put in place . . . but you get the idea!

I can’t resist a close-up:

Our Flip: Make a Splash

I think that the pale alabaster grout that we chose really showcases the tile by defining each piece, and also ties the backsplash in with the white cabinetry.

And finally, here’s a pic of the hubby and yours truly – please forgive us for our lovely appearances – it’s about 107 degrees in this photo (no joke!):

Our Flip: Make a Splash

And that’s that!!  Does it look as good as you thought it would?  I’m really pleased with the way it turned out, but I want to hear what you guys think!  And stay tuned for more details about our flip . . . it’s nearing the finish line!!

Grab Bars Be Gone

Anyone purchasing a home that has previously been lived in by someone else may find that a few details of the home do not suit their needs or lifestyle.  Luckily, most of the time these details can be easily fixed with just a little time and a few ideas.

That was the case with the bathtubs in our home.  When we moved in, each of the three bathtubs was outfitted with a plethora of grab bars (I’m talking at least three per tub).
versaguard-coated-grab-bars
(Alas, I did not have the foresight to photograph the grab bars in our tub, so we’ll just have to make do with this (slight) exaggeration).

Although these grab bars were necessary for the prior homeowner, we did not need them and found them to be a little unsightly and distracting so we decided to remove them.

At the time, we knew little to nothing about tile, or how to fix holes in tile – we thought that we were going to have to chisel out each of the tiles that had holes in them from the grab bars and replace them with new (and hopefully matching) tile!!  Luckily, it turns out that the remedy was a lot more simple and a lot cheaper.  Grout!!  Unsanded grout, to be precise.  According to the DIY Network, we needed unsanded grout, as opposed to sanded grout, because the holes that were going to be filled were less than 1/8 of an inch in diameter.  (Click here for a tutorial on how to mix and apply grout).

After filling in those little holes with some white, unsanded grout to match the tiles, the holes blend in almost perfectly – I couldn’t believe it!

p1030332

After removing the grab bars and filling in the holes the bars left behind, each of our bathtubs instantly looked new and fresh.  The transformation was really amazing.  Go ahead and give your own bathtub a little sprucing up!!

Related Posts with Thumbnails